How do I load the film in my CR-60UVi camera back?

How do I load the film in my CR-60UVi camera back?

Film can be loaded with film camera either attached or detached from main unit. However, loading of film with power of the CR-60UVi turned off will hasten the consumption of lithium battery in the film camera. Therefore, it is recommended that the operation be performed with the film camera attached to the CF-60UVi and its power turned out.

1. Push the cover latch down while pressing the back cover lock button to open the back cover.
2. Insert the film cartridge into the film chamber.
3. Pull the leading edge of the film across the shutter curtain until its tip is aligned with the orange index. There must be no slack. If film is pulled out too much, adjust the length by rewinding the excess film back into the cartridge.
4. After confirming that the perforations of film are engaged with the sprocket teeth, close the back cover. Film will be automatically wound on and "1" will be displayed on the panel of the camera. For illustrations and notes please refer to the user manual.